Logo Search packages:      
Sourcecode: u-boot-linaro version File versions  Download package

usb_ohci.c

/*
 * URB OHCI HCD (Host Controller Driver) for USB on the S3C2400.
 *
 * (C) Copyright 2003
 * Gary Jennejohn, DENX Software Engineering <garyj@denx.de>
 *
 * Note: Much of this code has been derived from Linux 2.4
 * (C) Copyright 1999 Roman Weissgaerber <weissg@vienna.at>
 * (C) Copyright 2000-2002 David Brownell
 *
 * See file CREDITS for list of people who contributed to this
 * project.
 *
 * This program is free software; you can redistribute it and/or
 * modify it under the terms of the GNU General Public License as
 * published by the Free Software Foundation; either version 2 of
 * the License, or (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program; if not, write to the Free Software
 * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
 * MA 02111-1307 USA
 *
 */
/*
 * IMPORTANT NOTES
 * 1 - this driver is intended for use with USB Mass Storage Devices
 *     (BBB) ONLY. There is NO support for Interrupt or Isochronous pipes!
 */

#include <common.h>
/* #include <pci.h> no PCI on the S3C24X0 */

#if defined(CONFIG_USB_OHCI) && defined(CONFIG_S3C24X0)

#include <asm/arch/s3c24x0_cpu.h>
#include <asm/io.h>
#include <malloc.h>
#include <usb.h>
#include "usb_ohci.h"

#define OHCI_USE_NPS          /* force NoPowerSwitching mode */
#undef OHCI_VERBOSE_DEBUG     /* not always helpful */


/* For initializing controller (mask in an HCFS mode too) */
#define     OHCI_CONTROL_INIT \
      (OHCI_CTRL_CBSR & 0x3) | OHCI_CTRL_IE | OHCI_CTRL_PLE

#define min_t(type, x, y) \
      ({ type __x = (x); type __y = (y); __x < __y ? __x : __y; })

#undef DEBUG
#ifdef DEBUG
#define dbg(format, arg...) printf("DEBUG: " format "\n", ## arg)
#else
#define dbg(format, arg...) do {} while(0)
#endif /* DEBUG */
#define err(format, arg...) printf("ERROR: " format "\n", ## arg)
#undef SHOW_INFO
#ifdef SHOW_INFO
#define info(format, arg...) printf("INFO: " format "\n", ## arg)
#else
#define info(format, arg...) do {} while(0)
#endif

#define m16_swap(x) swap_16(x)
#define m32_swap(x) swap_32(x)

/* global struct ohci */
static struct ohci gohci;
/* this must be aligned to a 256 byte boundary */
struct ohci_hcca ghcca[1];
/* a pointer to the aligned storage */
struct ohci_hcca *phcca;
/* this allocates EDs for all possible endpoints */
struct ohci_device ohci_dev;
/* urb_priv */
struct urb_priv urb_priv;
/* RHSC flag */
int got_rhsc;
/* device which was disconnected */
struct usb_device *devgone;
/* flag guarding URB transation */
int urb_finished = 0;

/*-------------------------------------------------------------------------*/

/* AMD-756 (D2 rev) reports corrupt register contents in some cases.
 * The erratum (#4) description is incorrect.  AMD's workaround waits
 * till some bits (mostly reserved) are clear; ok for all revs.
 */
#define OHCI_QUIRK_AMD756 0xabcd
#define read_roothub(hc, register, mask) ({ \
      u32 temp = readl (&hc->regs->roothub.register); \
      if (hc->flags & OHCI_QUIRK_AMD756) \
            while (temp & mask) \
                  temp = readl (&hc->regs->roothub.register); \
      temp; })

static u32 roothub_a(struct ohci *hc)
{
      return read_roothub(hc, a, 0xfc0fe000);
}
static inline u32 roothub_b(struct ohci *hc)
{
      return readl(&hc->regs->roothub.b);
}
static inline u32 roothub_status(struct ohci *hc)
{
      return readl(&hc->regs->roothub.status);
}
static u32 roothub_portstatus(struct ohci *hc, int i)
{
      return read_roothub(hc, portstatus[i], 0xffe0fce0);
}

/* forward declaration */
static int hc_interrupt(void);
static void td_submit_job(struct usb_device *dev, unsigned long pipe,
                    void *buffer, int transfer_len,
                    struct devrequest *setup, struct urb_priv *urb,
                    int interval);

/*-------------------------------------------------------------------------*
 * URB support functions
 *-------------------------------------------------------------------------*/

/* free HCD-private data associated with this URB */

static void urb_free_priv(struct urb_priv *urb)
{
      int i;
      int last;
      struct td *td;

      last = urb->length - 1;
      if (last >= 0) {
            for (i = 0; i <= last; i++) {
                  td = urb->td[i];
                  if (td) {
                        td->usb_dev = NULL;
                        urb->td[i] = NULL;
                  }
            }
      }
}

/*-------------------------------------------------------------------------*/

#ifdef DEBUG
static int sohci_get_current_frame_number(struct usb_device *dev);

/* debug| print the main components of an URB
 * small: 0) header + data packets 1) just header */

static void pkt_print(struct usb_device *dev, unsigned long pipe, void *buffer,
                  int transfer_len, struct devrequest *setup, char *str,
                  int small)
{
      struct urb_priv *purb = &urb_priv;

      dbg("%s URB:[%4x] dev:%2d,ep:%2d-%c,type:%s,len:%d/%d stat:%#lx",
          str,
          sohci_get_current_frame_number(dev),
          usb_pipedevice(pipe),
          usb_pipeendpoint(pipe),
          usb_pipeout(pipe) ? 'O' : 'I',
          usb_pipetype(pipe) < 2 ?
            (usb_pipeint(pipe) ? "INTR" : "ISOC") :
            (usb_pipecontrol(pipe) ? "CTRL" : "BULK"),
          purb->actual_length, transfer_len, dev->status);
#ifdef      OHCI_VERBOSE_DEBUG
      if (!small) {
            int i, len;

            if (usb_pipecontrol(pipe)) {
                  printf(__FILE__ ": cmd(8):");
                  for (i = 0; i < 8; i++)
                        printf(" %02x", ((__u8 *) setup)[i]);
                  printf("\n");
            }
            if (transfer_len > 0 && buffer) {
                  printf(__FILE__ ": data(%d/%d):",
                         purb->actual_length, transfer_len);
                  len = usb_pipeout(pipe) ?
                      transfer_len : purb->actual_length;
                  for (i = 0; i < 16 && i < len; i++)
                        printf(" %02x", ((__u8 *) buffer)[i]);
                  printf("%s\n", i < len ? "..." : "");
            }
      }
#endif
}

/* just for debugging; prints non-empty branches of the
   int ed tree inclusive iso eds*/
void ep_print_int_eds(struct ohci *ohci, char *str)
{
      int i, j;
      __u32 *ed_p;
      for (i = 0; i < 32; i++) {
            j = 5;
            ed_p = &(ohci->hcca->int_table[i]);
            if (*ed_p == 0)
                  continue;
            printf(__FILE__ ": %s branch int %2d(%2x):", str, i, i);
            while (*ed_p != 0 && j--) {
                  struct ed *ed = (struct ed *) m32_swap(ed_p);
                  printf(" ed: %4x;", ed->hwINFO);
                  ed_p = &ed->hwNextED;
            }
            printf("\n");
      }
}

static void ohci_dump_intr_mask(char *label, __u32 mask)
{
      dbg("%s: 0x%08x%s%s%s%s%s%s%s%s%s",
          label,
          mask,
          (mask & OHCI_INTR_MIE) ? " MIE" : "",
          (mask & OHCI_INTR_OC) ? " OC" : "",
          (mask & OHCI_INTR_RHSC) ? " RHSC" : "",
          (mask & OHCI_INTR_FNO) ? " FNO" : "",
          (mask & OHCI_INTR_UE) ? " UE" : "",
          (mask & OHCI_INTR_RD) ? " RD" : "",
          (mask & OHCI_INTR_SF) ? " SF" : "",
          (mask & OHCI_INTR_WDH) ? " WDH" : "",
          (mask & OHCI_INTR_SO) ? " SO" : "");
}

static void maybe_print_eds(char *label, __u32 value)
{
      struct ed *edp = (struct ed *) value;

      if (value) {
            dbg("%s %08x", label, value);
            dbg("%08x", edp->hwINFO);
            dbg("%08x", edp->hwTailP);
            dbg("%08x", edp->hwHeadP);
            dbg("%08x", edp->hwNextED);
      }
}

static char *hcfs2string(int state)
{
      switch (state) {
      case OHCI_USB_RESET:
            return "reset";
      case OHCI_USB_RESUME:
            return "resume";
      case OHCI_USB_OPER:
            return "operational";
      case OHCI_USB_SUSPEND:
            return "suspend";
      }
      return "?";
}

/* dump control and status registers */
static void ohci_dump_status(struct ohci *controller)
{
      struct ohci_regs *regs = controller->regs;
      __u32 temp;

      temp = readl(&regs->revision) & 0xff;
      if (temp != 0x10)
            dbg("spec %d.%d", (temp >> 4), (temp & 0x0f));

      temp = readl(&regs->control);
      dbg("control: 0x%08x%s%s%s HCFS=%s%s%s%s%s CBSR=%d", temp,
          (temp & OHCI_CTRL_RWE) ? " RWE" : "",
          (temp & OHCI_CTRL_RWC) ? " RWC" : "",
          (temp & OHCI_CTRL_IR) ? " IR" : "",
          hcfs2string(temp & OHCI_CTRL_HCFS),
          (temp & OHCI_CTRL_BLE) ? " BLE" : "",
          (temp & OHCI_CTRL_CLE) ? " CLE" : "",
          (temp & OHCI_CTRL_IE) ? " IE" : "",
          (temp & OHCI_CTRL_PLE) ? " PLE" : "", temp & OHCI_CTRL_CBSR);

      temp = readl(&regs->cmdstatus);
      dbg("cmdstatus: 0x%08x SOC=%d%s%s%s%s", temp,
          (temp & OHCI_SOC) >> 16,
          (temp & OHCI_OCR) ? " OCR" : "",
          (temp & OHCI_BLF) ? " BLF" : "",
          (temp & OHCI_CLF) ? " CLF" : "", (temp & OHCI_HCR) ? " HCR" : "");

      ohci_dump_intr_mask("intrstatus", readl(&regs->intrstatus));
      ohci_dump_intr_mask("intrenable", readl(&regs->intrenable));

      maybe_print_eds("ed_periodcurrent", readl(&regs->ed_periodcurrent));

      maybe_print_eds("ed_controlhead", readl(&regs->ed_controlhead));
      maybe_print_eds("ed_controlcurrent", readl(&regs->ed_controlcurrent));

      maybe_print_eds("ed_bulkhead", readl(&regs->ed_bulkhead));
      maybe_print_eds("ed_bulkcurrent", readl(&regs->ed_bulkcurrent));

      maybe_print_eds("donehead", readl(&regs->donehead));
}

static void ohci_dump_roothub(struct ohci *controller, int verbose)
{
      __u32 temp, ndp, i;

      temp = roothub_a(controller);
      ndp = (temp & RH_A_NDP);

      if (verbose) {
            dbg("roothub.a: %08x POTPGT=%d%s%s%s%s%s NDP=%d", temp,
                ((temp & RH_A_POTPGT) >> 24) & 0xff,
                (temp & RH_A_NOCP) ? " NOCP" : "",
                (temp & RH_A_OCPM) ? " OCPM" : "",
                (temp & RH_A_DT) ? " DT" : "",
                (temp & RH_A_NPS) ? " NPS" : "",
                (temp & RH_A_PSM) ? " PSM" : "", ndp);
            temp = roothub_b(controller);
            dbg("roothub.b: %08x PPCM=%04x DR=%04x",
                temp, (temp & RH_B_PPCM) >> 16, (temp & RH_B_DR)
                );
            temp = roothub_status(controller);
            dbg("roothub.status: %08x%s%s%s%s%s%s",
                temp,
                (temp & RH_HS_CRWE) ? " CRWE" : "",
                (temp & RH_HS_OCIC) ? " OCIC" : "",
                (temp & RH_HS_LPSC) ? " LPSC" : "",
                (temp & RH_HS_DRWE) ? " DRWE" : "",
                (temp & RH_HS_OCI) ? " OCI" : "",
                (temp & RH_HS_LPS) ? " LPS" : "");
      }

      for (i = 0; i < ndp; i++) {
            temp = roothub_portstatus(controller, i);
            dbg("roothub.portstatus [%d] = 0x%08x%s%s%s%s%s%s%s%s%s%s%s%s",
                i,
                temp,
                (temp & RH_PS_PRSC) ? " PRSC" : "",
                (temp & RH_PS_OCIC) ? " OCIC" : "",
                (temp & RH_PS_PSSC) ? " PSSC" : "",
                (temp & RH_PS_PESC) ? " PESC" : "",
                (temp & RH_PS_CSC) ? " CSC" : "",
                (temp & RH_PS_LSDA) ? " LSDA" : "",
                (temp & RH_PS_PPS) ? " PPS" : "",
                (temp & RH_PS_PRS) ? " PRS" : "",
                (temp & RH_PS_POCI) ? " POCI" : "",
                (temp & RH_PS_PSS) ? " PSS" : "",
                (temp & RH_PS_PES) ? " PES" : "",
                (temp & RH_PS_CCS) ? " CCS" : "");
      }
}

static void ohci_dump(struct ohci *controller, int verbose)
{
      dbg("OHCI controller usb-%s state", controller->slot_name);

      /* dumps some of the state we know about */
      ohci_dump_status(controller);
      if (verbose)
            ep_print_int_eds(controller, "hcca");
      dbg("hcca frame #%04x", controller->hcca->frame_no);
      ohci_dump_roothub(controller, 1);
}

#endif /* DEBUG */

/*-------------------------------------------------------------------------*
 * Interface functions (URB)
 *-------------------------------------------------------------------------*/

/* get a transfer request */

int sohci_submit_job(struct usb_device *dev, unsigned long pipe, void *buffer,
                 int transfer_len, struct devrequest *setup, int interval)
{
      struct ohci *ohci;
      struct ed *ed;
      struct urb_priv *purb_priv;
      int i, size = 0;

      ohci = &gohci;

      /* when controller's hung, permit only roothub cleanup attempts
       * such as powering down ports */
      if (ohci->disabled) {
            err("sohci_submit_job: EPIPE");
            return -1;
      }

      /* if we have an unfinished URB from previous transaction let's
       * fail and scream as quickly as possible so as not to corrupt
       * further communication */
      if (!urb_finished) {
            err("sohci_submit_job: URB NOT FINISHED");
            return -1;
      }
      /* we're about to begin a new transaction here
         so mark the URB unfinished */
      urb_finished = 0;

      /* every endpoint has a ed, locate and fill it */
      ed = ep_add_ed(dev, pipe);
      if (!ed) {
            err("sohci_submit_job: ENOMEM");
            return -1;
      }

      /* for the private part of the URB we need the number of TDs (size) */
      switch (usb_pipetype(pipe)) {
      case PIPE_BULK:
            /* one TD for every 4096 Byte */
            size = (transfer_len - 1) / 4096 + 1;
            break;
      case PIPE_CONTROL:
            /* 1 TD for setup, 1 for ACK and 1 for every 4096 B */
            size = (transfer_len == 0) ? 2 : (transfer_len - 1) / 4096 + 3;
            break;
      }

      if (size >= (N_URB_TD - 1)) {
            err("need %d TDs, only have %d", size, N_URB_TD);
            return -1;
      }
      purb_priv = &urb_priv;
      purb_priv->pipe = pipe;

      /* fill the private part of the URB */
      purb_priv->length = size;
      purb_priv->ed = ed;
      purb_priv->actual_length = 0;

      /* allocate the TDs */
      /* note that td[0] was allocated in ep_add_ed */
      for (i = 0; i < size; i++) {
            purb_priv->td[i] = td_alloc(dev);
            if (!purb_priv->td[i]) {
                  purb_priv->length = i;
                  urb_free_priv(purb_priv);
                  err("sohci_submit_job: ENOMEM");
                  return -1;
            }
      }

      if (ed->state == ED_NEW || (ed->state & ED_DEL)) {
            urb_free_priv(purb_priv);
            err("sohci_submit_job: EINVAL");
            return -1;
      }

      /* link the ed into a chain if is not already */
      if (ed->state != ED_OPER)
            ep_link(ohci, ed);

      /* fill the TDs and link it to the ed */
      td_submit_job(dev, pipe, buffer, transfer_len, setup, purb_priv,
                  interval);

      return 0;
}

/*-------------------------------------------------------------------------*/

#ifdef DEBUG
/* tell us the current USB frame number */

static int sohci_get_current_frame_number(struct usb_device *usb_dev)
{
      struct ohci *ohci = &gohci;

      return m16_swap(ohci->hcca->frame_no);
}
#endif

/*-------------------------------------------------------------------------*
 * ED handling functions
 *-------------------------------------------------------------------------*/

/* link an ed into one of the HC chains */

static int ep_link(struct ohci *ohci, struct ed *edi)
{
      struct ed *ed = edi;

      ed->state = ED_OPER;

      switch (ed->type) {
      case PIPE_CONTROL:
            ed->hwNextED = 0;
            if (ohci->ed_controltail == NULL) {
                  writel((u32)ed, &ohci->regs->ed_controlhead);
            } else {
                  ohci->ed_controltail->hwNextED = (__u32) m32_swap(ed);
            }
            ed->ed_prev = ohci->ed_controltail;
            if (!ohci->ed_controltail && !ohci->ed_rm_list[0] &&
                !ohci->ed_rm_list[1] && !ohci->sleeping) {
                  ohci->hc_control |= OHCI_CTRL_CLE;
                  writel(ohci->hc_control, &ohci->regs->control);
            }
            ohci->ed_controltail = edi;
            break;

      case PIPE_BULK:
            ed->hwNextED = 0;
            if (ohci->ed_bulktail == NULL) {
                  writel((u32)ed, &ohci->regs->ed_bulkhead);
            } else {
                  ohci->ed_bulktail->hwNextED = (__u32) m32_swap(ed);
            }
            ed->ed_prev = ohci->ed_bulktail;
            if (!ohci->ed_bulktail && !ohci->ed_rm_list[0] &&
                !ohci->ed_rm_list[1] && !ohci->sleeping) {
                  ohci->hc_control |= OHCI_CTRL_BLE;
                  writel(ohci->hc_control, &ohci->regs->control);
            }
            ohci->ed_bulktail = edi;
            break;
      }
      return 0;
}

/*-------------------------------------------------------------------------*/

/* unlink an ed from one of the HC chains.
 * just the link to the ed is unlinked.
 * the link from the ed still points to another operational ed or 0
 * so the HC can eventually finish the processing of the unlinked ed */

static int ep_unlink(struct ohci *ohci, struct ed *ed)
{
      struct ed *next;
      ed->hwINFO |= m32_swap(OHCI_ED_SKIP);

      switch (ed->type) {
      case PIPE_CONTROL:
            if (ed->ed_prev == NULL) {
                  if (!ed->hwNextED) {
                        ohci->hc_control &= ~OHCI_CTRL_CLE;
                        writel(ohci->hc_control, &ohci->regs->control);
                  }
                  writel(m32_swap(*((__u32 *) &ed->hwNextED)),
                         &ohci->regs->ed_controlhead);
            } else {
                  ed->ed_prev->hwNextED = ed->hwNextED;
            }
            if (ohci->ed_controltail == ed) {
                  ohci->ed_controltail = ed->ed_prev;
            } else {
                  next = (struct ed *)m32_swap(*((__u32 *)&ed->hwNextED));
                  next->ed_prev = ed->ed_prev;
            }
            break;

      case PIPE_BULK:
            if (ed->ed_prev == NULL) {
                  if (!ed->hwNextED) {
                        ohci->hc_control &= ~OHCI_CTRL_BLE;
                        writel(ohci->hc_control, &ohci->regs->control);
                  }
                  writel(m32_swap(*((__u32 *) &ed->hwNextED)),
                         &ohci->regs->ed_bulkhead);
            } else {
                  ed->ed_prev->hwNextED = ed->hwNextED;
            }
            if (ohci->ed_bulktail == ed) {
                  ohci->ed_bulktail = ed->ed_prev;
            } else {
                  next = (struct ed *)m32_swap(*((__u32 *)&ed->hwNextED));
                  next->ed_prev = ed->ed_prev;
            }
            break;
      }
      ed->state = ED_UNLINK;
      return 0;
}

/*-------------------------------------------------------------------------*/

/* add/reinit an endpoint; this should be done once at the usb_set_configuration
 * command, but the USB stack is a little bit stateless  so we do it at every
 * transaction. If the state of the ed is ED_NEW then a dummy td is added and
 * the state is changed to ED_UNLINK. In all other cases the state is left
 * unchanged. The ed info fields are setted anyway even though most of them
 * should not change */

static struct ed *ep_add_ed(struct usb_device *usb_dev, unsigned long pipe)
{
      struct td *td;
      struct ed *ed_ret;
      struct ed *ed;

      ed = ed_ret = &ohci_dev.ed[(usb_pipeendpoint(pipe) << 1) |
                           (usb_pipecontrol(pipe) ? 0 :
                            usb_pipeout(pipe))];

      if ((ed->state & ED_DEL) || (ed->state & ED_URB_DEL)) {
            err("ep_add_ed: pending delete");
            /* pending delete request */
            return NULL;
      }

      if (ed->state == ED_NEW) {
            ed->hwINFO = m32_swap(OHCI_ED_SKIP);      /* skip ed */
            /* dummy td; end of td list for ed */
            td = td_alloc(usb_dev);
            ed->hwTailP = (__u32) m32_swap(td);
            ed->hwHeadP = ed->hwTailP;
            ed->state = ED_UNLINK;
            ed->type = usb_pipetype(pipe);
            ohci_dev.ed_cnt++;
      }

      ed->hwINFO = m32_swap(usb_pipedevice(pipe)
                        | usb_pipeendpoint(pipe) << 7
                        | (usb_pipeisoc(pipe) ? 0x8000 : 0)
                        | (usb_pipecontrol(pipe) ? 0 :
                         (usb_pipeout(pipe) ? 0x800 : 0x1000))
                        | usb_pipeslow(pipe) << 13 |
                        usb_maxpacket(usb_dev, pipe) << 16);

      return ed_ret;
}

/*-------------------------------------------------------------------------*
 * TD handling functions
 *-------------------------------------------------------------------------*/

/* enqueue next TD for this URB (OHCI spec 5.2.8.2) */

static void td_fill(struct ohci *ohci, unsigned int info, void *data, int len,
                struct usb_device *dev, int index,
                struct urb_priv *urb_priv)
{
      struct td *td, *td_pt;
#ifdef OHCI_FILL_TRACE
      int i;
#endif

      if (index > urb_priv->length) {
            err("index > length");
            return;
      }
      /* use this td as the next dummy */
      td_pt = urb_priv->td[index];
      td_pt->hwNextTD = 0;

      /* fill the old dummy TD */
      td = urb_priv->td[index] =
          (struct td *) (m32_swap(urb_priv->ed->hwTailP) & ~0xf);

      td->ed = urb_priv->ed;
      td->next_dl_td = NULL;
      td->index = index;
      td->data = (__u32) data;
#ifdef OHCI_FILL_TRACE
      if (usb_pipebulk(urb_priv->pipe) && usb_pipeout(urb_priv->pipe)) {
            for (i = 0; i < len; i++)
                  printf("td->data[%d] %#2x ", i,
                         ((unsigned char *)td->data)[i]);
            printf("\n");
      }
#endif
      if (!len)
            data = 0;

      td->hwINFO = (__u32) m32_swap(info);
      td->hwCBP = (__u32) m32_swap(data);
      if (data)
            td->hwBE = (__u32) m32_swap(data + len - 1);
      else
            td->hwBE = 0;
      td->hwNextTD = (__u32) m32_swap(td_pt);

      /* append to queue */
      td->ed->hwTailP = td->hwNextTD;
}

/*-------------------------------------------------------------------------*/

/* prepare all TDs of a transfer */

static void td_submit_job(struct usb_device *dev, unsigned long pipe,
                    void *buffer, int transfer_len,
                    struct devrequest *setup, struct urb_priv *urb,
                    int interval)
{
      struct ohci *ohci = &gohci;
      int data_len = transfer_len;
      void *data;
      int cnt = 0;
      __u32 info = 0;
      unsigned int toggle = 0;

      /* OHCI handles the DATA-toggles itself, we just
         use the USB-toggle bits for reseting */
      if (usb_gettoggle(dev, usb_pipeendpoint(pipe), usb_pipeout(pipe))) {
            toggle = TD_T_TOGGLE;
      } else {
            toggle = TD_T_DATA0;
            usb_settoggle(dev, usb_pipeendpoint(pipe), usb_pipeout(pipe),
                        1);
      }
      urb->td_cnt = 0;
      if (data_len)
            data = buffer;
      else
            data = 0;

      switch (usb_pipetype(pipe)) {
      case PIPE_BULK:
            info = usb_pipeout(pipe) ? TD_CC | TD_DP_OUT : TD_CC | TD_DP_IN;
            while (data_len > 4096) {
                  td_fill(ohci, info | (cnt ? TD_T_TOGGLE : toggle), data,
                        4096, dev, cnt, urb);
                  data += 4096;
                  data_len -= 4096;
                  cnt++;
            }
            info = usb_pipeout(pipe) ?
                        TD_CC | TD_DP_OUT :
                        TD_CC | TD_R | TD_DP_IN;
            td_fill(ohci, info | (cnt ? TD_T_TOGGLE : toggle), data,
                  data_len, dev, cnt, urb);
            cnt++;

            if (!ohci->sleeping)
                  /* start bulk list */
                  writel(OHCI_BLF, &ohci->regs->cmdstatus);
            break;

      case PIPE_CONTROL:
            info = TD_CC | TD_DP_SETUP | TD_T_DATA0;
            td_fill(ohci, info, setup, 8, dev, cnt++, urb);
            if (data_len > 0) {
                  info = usb_pipeout(pipe) ?
                      TD_CC | TD_R | TD_DP_OUT | TD_T_DATA1 :
                      TD_CC | TD_R | TD_DP_IN | TD_T_DATA1;
                  /* NOTE:  mishandles transfers >8K, some >4K */
                  td_fill(ohci, info, data, data_len, dev, cnt++, urb);
            }
            info = usb_pipeout(pipe) ?
                TD_CC | TD_DP_IN | TD_T_DATA1 :
                TD_CC | TD_DP_OUT | TD_T_DATA1;
            td_fill(ohci, info, data, 0, dev, cnt++, urb);
            if (!ohci->sleeping)
                  /* start Control list */
                  writel(OHCI_CLF, &ohci->regs->cmdstatus);
            break;
      }
      if (urb->length != cnt)
            dbg("TD LENGTH %d != CNT %d", urb->length, cnt);
}

/*-------------------------------------------------------------------------*
 * Done List handling functions
 *-------------------------------------------------------------------------*/


/* calculate the transfer length and update the urb */

static void dl_transfer_length(struct td *td)
{
      __u32 tdINFO, tdBE, tdCBP;
      struct urb_priv *lurb_priv = &urb_priv;

      tdINFO = m32_swap(td->hwINFO);
      tdBE = m32_swap(td->hwBE);
      tdCBP = m32_swap(td->hwCBP);

      if (!(usb_pipecontrol(lurb_priv->pipe) &&
            ((td->index == 0) || (td->index == lurb_priv->length - 1)))) {
            if (tdBE != 0) {
                  if (td->hwCBP == 0)
                        lurb_priv->actual_length += tdBE - td->data + 1;
                  else
                        lurb_priv->actual_length += tdCBP - td->data;
            }
      }
}

/*-------------------------------------------------------------------------*/

/* replies to the request have to be on a FIFO basis so
 * we reverse the reversed done-list */

static struct td *dl_reverse_done_list(struct ohci *ohci)
{
      __u32 td_list_hc;
      __u32 tmp;
      struct td *td_rev = NULL;
      struct td *td_list = NULL;
      struct urb_priv *lurb_priv = NULL;

      td_list_hc = m32_swap(ohci->hcca->done_head) & 0xfffffff0;
      ohci->hcca->done_head = 0;

      while (td_list_hc) {
            td_list = (struct td *) td_list_hc;

            if (TD_CC_GET(m32_swap(td_list->hwINFO))) {
                  lurb_priv = &urb_priv;
                  dbg(" USB-error/status: %x : %p",
                      TD_CC_GET(m32_swap(td_list->hwINFO)), td_list);
                  if (td_list->ed->hwHeadP & m32_swap(0x1)) {
                        if (lurb_priv &&
                            ((td_list->index+1) < lurb_priv->length)) {
                              tmp = lurb_priv->length - 1;
                              td_list->ed->hwHeadP =
                                    (lurb_priv->td[tmp]->hwNextTD &
                                     m32_swap(0xfffffff0)) |
                                     (td_list->ed->hwHeadP &
                                      m32_swap(0x2));
                              lurb_priv->td_cnt += lurb_priv->length -
                                               td_list->index - 1;
                        } else
                              td_list->ed->hwHeadP &=
                                  m32_swap(0xfffffff2);
                  }
            }

            td_list->next_dl_td = td_rev;
            td_rev = td_list;
            td_list_hc = m32_swap(td_list->hwNextTD) & 0xfffffff0;
      }

      return td_list;
}

/*-------------------------------------------------------------------------*/

/* td done list */
static int dl_done_list(struct ohci *ohci, struct td *td_list)
{
      struct td *td_list_next = NULL;
      struct ed *ed;
      int cc = 0;
      int stat = 0;
      /* urb_t *urb; */
      struct urb_priv *lurb_priv;
      __u32 tdINFO, edHeadP, edTailP;

      while (td_list) {
            td_list_next = td_list->next_dl_td;

            lurb_priv = &urb_priv;
            tdINFO = m32_swap(td_list->hwINFO);

            ed = td_list->ed;

            dl_transfer_length(td_list);

            /* error code of transfer */
            cc = TD_CC_GET(tdINFO);
            if (cc != 0) {
                  dbg("ConditionCode %#x", cc);
                  stat = cc_to_error[cc];
            }

            /* see if this done list makes for all TD's of current URB,
             * and mark the URB finished if so */
            if (++(lurb_priv->td_cnt) == lurb_priv->length) {
                  if ((ed->state & (ED_OPER | ED_UNLINK)))
                        urb_finished = 1;
                  else
                        dbg("dl_done_list: strange.., ED state %x, "
                            "ed->state\n");
            } else
                  dbg("dl_done_list: processing TD %x, len %x\n",
                      lurb_priv->td_cnt, lurb_priv->length);

            if (ed->state != ED_NEW) {
                  edHeadP = m32_swap(ed->hwHeadP) & 0xfffffff0;
                  edTailP = m32_swap(ed->hwTailP);

                  /* unlink eds if they are not busy */
                  if ((edHeadP == edTailP) && (ed->state == ED_OPER))
                        ep_unlink(ohci, ed);
            }

            td_list = td_list_next;
      }
      return stat;
}

/*-------------------------------------------------------------------------*
 * Virtual Root Hub
 *-------------------------------------------------------------------------*/

/* Device descriptor */
static __u8 root_hub_dev_des[] = {
      0x12, /*  __u8  bLength; */
      0x01, /*  __u8  bDescriptorType; Device */
      0x10, /*  __u16 bcdUSB; v1.1 */
      0x01,
      0x09, /*  __u8  bDeviceClass; HUB_CLASSCODE */
      0x00, /*  __u8  bDeviceSubClass; */
      0x00, /*  __u8  bDeviceProtocol; */
      0x08, /*  __u8  bMaxPacketSize0; 8 Bytes */
      0x00, /*  __u16 idVendor; */
      0x00,
      0x00, /*  __u16 idProduct; */
      0x00,
      0x00, /*  __u16 bcdDevice; */
      0x00,
      0x00, /*  __u8  iManufacturer; */
      0x01, /*  __u8  iProduct; */
      0x00, /*  __u8  iSerialNumber; */
      0x01  /*  __u8  bNumConfigurations; */
};

/* Configuration descriptor */
static __u8 root_hub_config_des[] = {
      0x09, /*  __u8  bLength; */
      0x02, /*  __u8  bDescriptorType; Configuration */
      0x19, /*  __u16 wTotalLength; */
      0x00,
      0x01, /*  __u8  bNumInterfaces; */
      0x01, /*  __u8  bConfigurationValue; */
      0x00, /*  __u8  iConfiguration; */
      0x40, /*  __u8  bmAttributes;
               Bit 7: Bus-powered, 6: Self-powered,
               5 Remote-wakwup, 4..0: resvd */
      0x00, /*  __u8  MaxPower; */

      /* interface */
      0x09, /*  __u8  if_bLength; */
      0x04, /*  __u8  if_bDescriptorType; Interface */
      0x00, /*  __u8  if_bInterfaceNumber; */
      0x00, /*  __u8  if_bAlternateSetting; */
      0x01, /*  __u8  if_bNumEndpoints; */
      0x09, /*  __u8  if_bInterfaceClass; HUB_CLASSCODE */
      0x00, /*  __u8  if_bInterfaceSubClass; */
      0x00, /*  __u8  if_bInterfaceProtocol; */
      0x00, /*  __u8  if_iInterface; */

      /* endpoint */
      0x07, /*  __u8  ep_bLength; */
      0x05, /*  __u8  ep_bDescriptorType; Endpoint */
      0x81, /*  __u8  ep_bEndpointAddress; IN Endpoint 1 */
      0x03, /*  __u8  ep_bmAttributes; Interrupt */
      0x02, /*  __u16 ep_wMaxPacketSize; ((MAX_ROOT_PORTS + 1) / 8 */
      0x00,
      0xff  /*  __u8  ep_bInterval; 255 ms */
};

static unsigned char root_hub_str_index0[] = {
      0x04, /*  __u8  bLength; */
      0x03, /*  __u8  bDescriptorType; String-descriptor */
      0x09, /*  __u8  lang ID */
      0x04, /*  __u8  lang ID */
};

static unsigned char root_hub_str_index1[] = {
      28,   /*  __u8  bLength; */
      0x03, /*  __u8  bDescriptorType; String-descriptor */
      'O',  /*  __u8  Unicode */
      0,    /*  __u8  Unicode */
      'H',  /*  __u8  Unicode */
      0,    /*  __u8  Unicode */
      'C',  /*  __u8  Unicode */
      0,    /*  __u8  Unicode */
      'I',  /*  __u8  Unicode */
      0,    /*  __u8  Unicode */
      ' ',  /*  __u8  Unicode */
      0,    /*  __u8  Unicode */
      'R',  /*  __u8  Unicode */
      0,    /*  __u8  Unicode */
      'o',  /*  __u8  Unicode */
      0,    /*  __u8  Unicode */
      'o',  /*  __u8  Unicode */
      0,    /*  __u8  Unicode */
      't',  /*  __u8  Unicode */
      0,    /*  __u8  Unicode */
      ' ',  /*  __u8  Unicode */
      0,    /*  __u8  Unicode */
      'H',  /*  __u8  Unicode */
      0,    /*  __u8  Unicode */
      'u',  /*  __u8  Unicode */
      0,    /*  __u8  Unicode */
      'b',  /*  __u8  Unicode */
      0,    /*  __u8  Unicode */
};

/* Hub class-specific descriptor is constructed dynamically */


/*-------------------------------------------------------------------------*/

#define OK(x)                 len = (x); break
#ifdef DEBUG
#define WR_RH_STAT(x) \
{ \
      info("WR:status %#8x", (x)); \
      writel((x), &gohci.regs->roothub.status); \
}
#define WR_RH_PORTSTAT(x) \
{ \
      info("WR:portstatus[%d] %#8x", wIndex-1, (x)); \
      writel((x), &gohci.regs->roothub.portstatus[wIndex-1]); \
}
#else
#define WR_RH_STAT(x) \
      writel((x), &gohci.regs->roothub.status)
#define WR_RH_PORTSTAT(x)\
      writel((x), &gohci.regs->roothub.portstatus[wIndex-1])
#endif
#define RD_RH_STAT      roothub_status(&gohci)
#define RD_RH_PORTSTAT  roothub_portstatus(&gohci, wIndex-1)

/* request to virtual root hub */

int rh_check_port_status(struct ohci *controller)
{
      __u32 temp, ndp, i;
      int res;

      res = -1;
      temp = roothub_a(controller);
      ndp = (temp & RH_A_NDP);
      for (i = 0; i < ndp; i++) {
            temp = roothub_portstatus(controller, i);
            /* check for a device disconnect */
            if (((temp & (RH_PS_PESC | RH_PS_CSC)) ==
                 (RH_PS_PESC | RH_PS_CSC)) && ((temp & RH_PS_CCS) == 0)) {
                  res = i;
                  break;
            }
      }
      return res;
}

static int ohci_submit_rh_msg(struct usb_device *dev, unsigned long pipe,
                        void *buffer, int transfer_len,
                        struct devrequest *cmd)
{
      void *data = buffer;
      int leni = transfer_len;
      int len = 0;
      int stat = 0;
      __u32 datab[4];
      __u8 *data_buf = (__u8 *) datab;
      __u16 bmRType_bReq;
      __u16 wValue;
      __u16 wIndex;
      __u16 wLength;

#ifdef DEBUG
      urb_priv.actual_length = 0;
      pkt_print(dev, pipe, buffer, transfer_len, cmd, "SUB(rh)",
              usb_pipein(pipe));
#else
      wait_ms(1);
#endif
      if (usb_pipeint(pipe)) {
            info("Root-Hub submit IRQ: NOT implemented");
            return 0;
      }

      bmRType_bReq = cmd->requesttype | (cmd->request << 8);
      wValue = m16_swap(cmd->value);
      wIndex = m16_swap(cmd->index);
      wLength = m16_swap(cmd->length);

      info("Root-Hub: adr: %2x cmd(%1x): %08x %04x %04x %04x",
           dev->devnum, 8, bmRType_bReq, wValue, wIndex, wLength);

      switch (bmRType_bReq) {
            /* Request Destination:
               without flags: Device,
               RH_INTERFACE: interface,
               RH_ENDPOINT: endpoint,
               RH_CLASS means HUB here,
               RH_OTHER | RH_CLASS  almost ever means HUB_PORT here
             */

      case RH_GET_STATUS:
            *(__u16 *) data_buf = m16_swap(1);
            OK(2);
      case RH_GET_STATUS | RH_INTERFACE:
            *(__u16 *) data_buf = m16_swap(0);
            OK(2);
      case RH_GET_STATUS | RH_ENDPOINT:
            *(__u16 *) data_buf = m16_swap(0);
            OK(2);
      case RH_GET_STATUS | RH_CLASS:
            *(__u32 *) data_buf =
                m32_swap(RD_RH_STAT & ~(RH_HS_CRWE | RH_HS_DRWE));
            OK(4);
      case RH_GET_STATUS | RH_OTHER | RH_CLASS:
            *(__u32 *) data_buf = m32_swap(RD_RH_PORTSTAT);
            OK(4);

      case RH_CLEAR_FEATURE | RH_ENDPOINT:
            switch (wValue) {
            case (RH_ENDPOINT_STALL):
                  OK(0);
            }
            break;

      case RH_CLEAR_FEATURE | RH_CLASS:
            switch (wValue) {
            case RH_C_HUB_LOCAL_POWER:
                  OK(0);
            case (RH_C_HUB_OVER_CURRENT):
                  WR_RH_STAT(RH_HS_OCIC);
                  OK(0);
            }
            break;

      case RH_CLEAR_FEATURE | RH_OTHER | RH_CLASS:
            switch (wValue) {
            case (RH_PORT_ENABLE):
                  WR_RH_PORTSTAT(RH_PS_CCS);
                  OK(0);
            case (RH_PORT_SUSPEND):
                  WR_RH_PORTSTAT(RH_PS_POCI);
                  OK(0);
            case (RH_PORT_POWER):
                  WR_RH_PORTSTAT(RH_PS_LSDA);
                  OK(0);
            case (RH_C_PORT_CONNECTION):
                  WR_RH_PORTSTAT(RH_PS_CSC);
                  OK(0);
            case (RH_C_PORT_ENABLE):
                  WR_RH_PORTSTAT(RH_PS_PESC);
                  OK(0);
            case (RH_C_PORT_SUSPEND):
                  WR_RH_PORTSTAT(RH_PS_PSSC);
                  OK(0);
            case (RH_C_PORT_OVER_CURRENT):
                  WR_RH_PORTSTAT(RH_PS_OCIC);
                  OK(0);
            case (RH_C_PORT_RESET):
                  WR_RH_PORTSTAT(RH_PS_PRSC);
                  OK(0);
            }
            break;

      case RH_SET_FEATURE | RH_OTHER | RH_CLASS:
            switch (wValue) {
            case (RH_PORT_SUSPEND):
                  WR_RH_PORTSTAT(RH_PS_PSS);
                  OK(0);
            case (RH_PORT_RESET):   /* BUG IN HUP CODE ******** */
                  if (RD_RH_PORTSTAT & RH_PS_CCS)
                        WR_RH_PORTSTAT(RH_PS_PRS);
                  OK(0);
            case (RH_PORT_POWER):
                  WR_RH_PORTSTAT(RH_PS_PPS);
                  OK(0);
            case (RH_PORT_ENABLE):  /* BUG IN HUP CODE ******** */
                  if (RD_RH_PORTSTAT & RH_PS_CCS)
                        WR_RH_PORTSTAT(RH_PS_PES);
                  OK(0);
            }
            break;

      case RH_SET_ADDRESS:
            gohci.rh.devnum = wValue;
            OK(0);

      case RH_GET_DESCRIPTOR:
            switch ((wValue & 0xff00) >> 8) {
            case (0x01):      /* device descriptor */
                  len = min_t(unsigned int,
                            leni,
                            min_t(unsigned int,
                                sizeof(root_hub_dev_des), wLength));
                  data_buf = root_hub_dev_des;
                  OK(len);
            case (0x02):      /* configuration descriptor */
                  len = min_t(unsigned int,
                            leni,
                            min_t(unsigned int,
                                sizeof(root_hub_config_des),
                                wLength));
                  data_buf = root_hub_config_des;
                  OK(len);
            case (0x03):      /* string descriptors */
                  if (wValue == 0x0300) {
                        len = min_t(unsigned int,
                                  leni,
                                  min_t(unsigned int,
                                      sizeof(root_hub_str_index0),
                                      wLength));
                        data_buf = root_hub_str_index0;
                        OK(len);
                  }
                  if (wValue == 0x0301) {
                        len = min_t(unsigned int,
                                  leni,
                                  min_t(unsigned int,
                                      sizeof(root_hub_str_index1),
                                      wLength));
                        data_buf = root_hub_str_index1;
                        OK(len);
                  }
            default:
                  stat = USB_ST_STALLED;
            }
            break;

      case RH_GET_DESCRIPTOR | RH_CLASS:
            {
                  __u32 temp = roothub_a(&gohci);

                  data_buf[0] = 9;  /* min length; */
                  data_buf[1] = 0x29;
                  data_buf[2] = temp & RH_A_NDP;
                  data_buf[3] = 0;
                  if (temp & RH_A_PSM)
                        /* per-port power switching? */
                        data_buf[3] |= 0x1;
                  if (temp & RH_A_NOCP)
                        /* no overcurrent reporting? */
                        data_buf[3] |= 0x10;
                  else if (temp & RH_A_OCPM)
                        /* per-port overcurrent reporting? */
                        data_buf[3] |= 0x8;

                  /* corresponds to data_buf[4-7] */
                  datab[1] = 0;
                  data_buf[5] = (temp & RH_A_POTPGT) >> 24;
                  temp = roothub_b(&gohci);
                  data_buf[7] = temp & RH_B_DR;
                  if (data_buf[2] < 7) {
                        data_buf[8] = 0xff;
                  } else {
                        data_buf[0] += 2;
                        data_buf[8] = (temp & RH_B_DR) >> 8;
                        data_buf[10] = data_buf[9] = 0xff;
                  }

                  len = min_t(unsigned int, leni,
                            min_t(unsigned int, data_buf[0], wLength));
                  OK(len);
            }

      case RH_GET_CONFIGURATION:
            *(__u8 *) data_buf = 0x01;
            OK(1);

      case RH_SET_CONFIGURATION:
            WR_RH_STAT(0x10000);
            OK(0);

      default:
            dbg("unsupported root hub command");
            stat = USB_ST_STALLED;
      }

#ifdef      DEBUG
      ohci_dump_roothub(&gohci, 1);
#else
      wait_ms(1);
#endif

      len = min_t(int, len, leni);
      if (data != data_buf)
            memcpy(data, data_buf, len);
      dev->act_len = len;
      dev->status = stat;

#ifdef DEBUG
      if (transfer_len)
            urb_priv.actual_length = transfer_len;
      pkt_print(dev, pipe, buffer, transfer_len, cmd, "RET(rh)",
              0 /*usb_pipein(pipe) */);
#else
      wait_ms(1);
#endif

      return stat;
}

/*-------------------------------------------------------------------------*/

/* common code for handling submit messages - used for all but root hub */
/* accesses. */
int submit_common_msg(struct usb_device *dev, unsigned long pipe, void *buffer,
                  int transfer_len, struct devrequest *setup, int interval)
{
      int stat = 0;
      int maxsize = usb_maxpacket(dev, pipe);
      int timeout;

      /* device pulled? Shortcut the action. */
      if (devgone == dev) {
            dev->status = USB_ST_CRC_ERR;
            return 0;
      }
#ifdef DEBUG
      urb_priv.actual_length = 0;
      pkt_print(dev, pipe, buffer, transfer_len, setup, "SUB",
              usb_pipein(pipe));
#else
      wait_ms(1);
#endif
      if (!maxsize) {
            err("submit_common_message: pipesize for pipe %lx is zero",
                pipe);
            return -1;
      }

      if (sohci_submit_job(dev, pipe, buffer, transfer_len, setup, interval) <
          0) {
            err("sohci_submit_job failed");
            return -1;
      }

      wait_ms(10);
      /* ohci_dump_status(&gohci); */

      /* allow more time for a BULK device to react - some are slow */
#define BULK_TO    5000       /* timeout in milliseconds */
      if (usb_pipebulk(pipe))
            timeout = BULK_TO;
      else
            timeout = 100;

      /* wait for it to complete */
      for (;;) {
            /* check whether the controller is done */
            stat = hc_interrupt();

            if (stat < 0) {
                  stat = USB_ST_CRC_ERR;
                  break;
            }

            /* NOTE: since we are not interrupt driven in U-Boot and always
             * handle only one URB at a time, we cannot assume the
             * transaction finished on the first successful return from
             * hc_interrupt().. unless the flag for current URB is set,
             * meaning that all TD's to/from device got actually
             * transferred and processed. If the current URB is not
             * finished we need to re-iterate this loop so as
             * hc_interrupt() gets called again as there needs to be some
             * more TD's to process still */
            if ((stat >= 0) && (stat != 0xff) && (urb_finished)) {
                  /* 0xff is returned for an SF-interrupt */
                  break;
            }

            if (--timeout) {
                  wait_ms(1);
                  if (!urb_finished)
                        dbg("\%");

            } else {
                  err("CTL:TIMEOUT ");
                  dbg("submit_common_msg: TO status %x\n", stat);
                  stat = USB_ST_CRC_ERR;
                  urb_finished = 1;
                  break;
            }
      }

#if 0
      /* we got an Root Hub Status Change interrupt */
      if (got_rhsc) {
#ifdef DEBUG
            ohci_dump_roothub(&gohci, 1);
#endif
            got_rhsc = 0;
            /* abuse timeout */
            timeout = rh_check_port_status(&gohci);
            if (timeout >= 0) {
#if 0             /* this does nothing useful, but leave it here
                     in case that changes */
                  /* the called routine adds 1 to the passed value */
                  usb_hub_port_connect_change(gohci.rh.dev, timeout - 1);
#endif
                  /*
                   * XXX
                   * This is potentially dangerous because it assumes
                   * that only one device is ever plugged in!
                   */
                  devgone = dev;
            }
      }
#endif

      dev->status = stat;
      dev->act_len = transfer_len;

#ifdef DEBUG
      pkt_print(dev, pipe, buffer, transfer_len, setup, "RET(ctlr)",
              usb_pipein(pipe));
#else
      wait_ms(1);
#endif

      /* free TDs in urb_priv */
      urb_free_priv(&urb_priv);
      return 0;
}

/* submit routines called from usb.c */
int submit_bulk_msg(struct usb_device *dev, unsigned long pipe, void *buffer,
                int transfer_len)
{
      info("submit_bulk_msg");
      return submit_common_msg(dev, pipe, buffer, transfer_len, NULL, 0);
}

int submit_control_msg(struct usb_device *dev, unsigned long pipe, void *buffer,
                   int transfer_len, struct devrequest *setup)
{
      int maxsize = usb_maxpacket(dev, pipe);

      info("submit_control_msg");
#ifdef DEBUG
      urb_priv.actual_length = 0;
      pkt_print(dev, pipe, buffer, transfer_len, setup, "SUB",
              usb_pipein(pipe));
#else
      wait_ms(1);
#endif
      if (!maxsize) {
            err("submit_control_message: pipesize for pipe %lx is zero",
                pipe);
            return -1;
      }
      if (((pipe >> 8) & 0x7f) == gohci.rh.devnum) {
            gohci.rh.dev = dev;
            /* root hub - redirect */
            return ohci_submit_rh_msg(dev, pipe, buffer, transfer_len,
                                setup);
      }

      return submit_common_msg(dev, pipe, buffer, transfer_len, setup, 0);
}

int submit_int_msg(struct usb_device *dev, unsigned long pipe, void *buffer,
               int transfer_len, int interval)
{
      info("submit_int_msg");
      return -1;
}

/*-------------------------------------------------------------------------*
 * HC functions
 *-------------------------------------------------------------------------*/

/* reset the HC and BUS */

static int hc_reset(struct ohci *ohci)
{
      int timeout = 30;
      int smm_timeout = 50;   /* 0,5 sec */

      if (readl(&ohci->regs->control) & OHCI_CTRL_IR) {
            /* SMM owns the HC - request ownership */
            writel(OHCI_OCR, &ohci->regs->cmdstatus);
            info("USB HC TakeOver from SMM");
            while (readl(&ohci->regs->control) & OHCI_CTRL_IR) {
                  wait_ms(10);
                  if (--smm_timeout == 0) {
                        err("USB HC TakeOver failed!");
                        return -1;
                  }
            }
      }

      /* Disable HC interrupts */
      writel(OHCI_INTR_MIE, &ohci->regs->intrdisable);

      dbg("USB HC reset_hc usb-%s: ctrl = 0x%X ;",
          ohci->slot_name, readl(&ohci->regs->control));

      /* Reset USB (needed by some controllers) */
      writel(0, &ohci->regs->control);

      /* HC Reset requires max 10 us delay */
      writel(OHCI_HCR, &ohci->regs->cmdstatus);
      while ((readl(&ohci->regs->cmdstatus) & OHCI_HCR) != 0) {
            if (--timeout == 0) {
                  err("USB HC reset timed out!");
                  return -1;
            }
            udelay(1);
      }
      return 0;
}

/*-------------------------------------------------------------------------*/

/* Start an OHCI controller, set the BUS operational
 * enable interrupts
 * connect the virtual root hub */

static int hc_start(struct ohci *ohci)
{
      __u32 mask;
      unsigned int fminterval;

      ohci->disabled = 1;

      /* Tell the controller where the control and bulk lists are
       * The lists are empty now. */

      writel(0, &ohci->regs->ed_controlhead);
      writel(0, &ohci->regs->ed_bulkhead);

      /* a reset clears this */
      writel((__u32) ohci->hcca, &ohci->regs->hcca);

      fminterval = 0x2edf;
      writel((fminterval * 9) / 10, &ohci->regs->periodicstart);
      fminterval |= ((((fminterval - 210) * 6) / 7) << 16);
      writel(fminterval, &ohci->regs->fminterval);
      writel(0x628, &ohci->regs->lsthresh);

      /* start controller operations */
      ohci->hc_control = OHCI_CONTROL_INIT | OHCI_USB_OPER;
      ohci->disabled = 0;
      writel(ohci->hc_control, &ohci->regs->control);

      /* disable all interrupts */
      mask = (OHCI_INTR_SO | OHCI_INTR_WDH | OHCI_INTR_SF | OHCI_INTR_RD |
            OHCI_INTR_UE | OHCI_INTR_FNO | OHCI_INTR_RHSC |
            OHCI_INTR_OC | OHCI_INTR_MIE);
      writel(mask, &ohci->regs->intrdisable);
      /* clear all interrupts */
      mask &= ~OHCI_INTR_MIE;
      writel(mask, &ohci->regs->intrstatus);
      /* Choose the interrupts we care about now  - but w/o MIE */
      mask = OHCI_INTR_RHSC | OHCI_INTR_UE | OHCI_INTR_WDH | OHCI_INTR_SO;
      writel(mask, &ohci->regs->intrenable);

#ifdef      OHCI_USE_NPS
      /* required for AMD-756 and some Mac platforms */
      writel((roothub_a(ohci) | RH_A_NPS) & ~RH_A_PSM,
             &ohci->regs->roothub.a);
      writel(RH_HS_LPSC, &ohci->regs->roothub.status);
#endif /* OHCI_USE_NPS */

#define mdelay(n) ({unsigned long msec=(n); while (msec--) udelay(1000);})
      /* POTPGT delay is bits 24-31, in 2 ms units. */
      mdelay((roothub_a(ohci) >> 23) & 0x1fe);

      /* connect the virtual root hub */
      ohci->rh.devnum = 0;

      return 0;
}

/*-------------------------------------------------------------------------*/

/* an interrupt happens */

static int hc_interrupt(void)
{
      struct ohci *ohci = &gohci;
      struct ohci_regs *regs = ohci->regs;
      int ints;
      int stat = -1;

      if ((ohci->hcca->done_head != 0) &&
          !(m32_swap(ohci->hcca->done_head) & 0x01)) {

            ints = OHCI_INTR_WDH;

      } else {
            ints = readl(&regs->intrstatus);
            if (ints == ~(u32) 0) {
                  ohci->disabled++;
                  err("%s device removed!", ohci->slot_name);
                  return -1;
            }
            ints &= readl(&regs->intrenable);
            if (ints == 0) {
                  dbg("hc_interrupt: returning..\n");
                  return 0xff;
            }
      }

      /* dbg("Interrupt: %x frame: %x", ints,
          le16_to_cpu(ohci->hcca->frame_no)); */

      if (ints & OHCI_INTR_RHSC) {
            got_rhsc = 1;
            stat = 0xff;
      }

      if (ints & OHCI_INTR_UE) {
            ohci->disabled++;
            err("OHCI Unrecoverable Error, controller usb-%s disabled",
                ohci->slot_name);
            /* e.g. due to PCI Master/Target Abort */

#ifdef      DEBUG
            ohci_dump(ohci, 1);
#else
            wait_ms(1);
#endif
            /* FIXME: be optimistic, hope that bug won't repeat often. */
            /* Make some non-interrupt context restart the controller. */
            /* Count and limit the retries though; either hardware or */
            /* software errors can go forever... */
            hc_reset(ohci);
            return -1;
      }

      if (ints & OHCI_INTR_WDH) {
            wait_ms(1);

            writel(OHCI_INTR_WDH, &regs->intrdisable);
            stat = dl_done_list(&gohci, dl_reverse_done_list(&gohci));
            writel(OHCI_INTR_WDH, &regs->intrenable);
      }

      if (ints & OHCI_INTR_SO) {
            dbg("USB Schedule overrun\n");
            writel(OHCI_INTR_SO, &regs->intrenable);
            stat = -1;
      }

      /* FIXME:  this assumes SOF (1/ms) interrupts don't get lost... */
      if (ints & OHCI_INTR_SF) {
            unsigned int frame = m16_swap(ohci->hcca->frame_no) & 1;
            wait_ms(1);
            writel(OHCI_INTR_SF, &regs->intrdisable);
            if (ohci->ed_rm_list[frame] != NULL)
                  writel(OHCI_INTR_SF, &regs->intrenable);
            stat = 0xff;
      }

      writel(ints, &regs->intrstatus);
      return stat;
}

/*-------------------------------------------------------------------------*/

/*-------------------------------------------------------------------------*/

/* De-allocate all resources.. */

static void hc_release_ohci(struct ohci *ohci)
{
      dbg("USB HC release ohci usb-%s", ohci->slot_name);

      if (!ohci->disabled)
            hc_reset(ohci);
}

/*-------------------------------------------------------------------------*/

/*
 * low level initalisation routine, called from usb.c
 */
static char ohci_inited = 0;

int usb_lowlevel_init(void)
{
      struct s3c24x0_clock_power *clk_power = s3c24x0_get_base_clock_power();
      struct s3c24x0_gpio *gpio = s3c24x0_get_base_gpio();

      /*
       * Set the 48 MHz UPLL clocking. Values are taken from
       * "PLL value selection guide", 6-23, s3c2400_UM.pdf.
       */
      clk_power->UPLLCON = ((40 << 12) + (1 << 4) + 2);
      gpio->MISCCR |= 0x8;    /* 1 = use pads related USB for USB host */

      /*
       * Enable USB host clock.
       */
      clk_power->CLKCON |= (1 << 4);

      memset(&gohci, 0, sizeof(struct ohci));
      memset(&urb_priv, 0, sizeof(struct urb_priv));

      /* align the storage */
      if ((__u32) &ghcca[0] & 0xff) {
            err("HCCA not aligned!!");
            return -1;
      }
      phcca = &ghcca[0];
      info("aligned ghcca %p", phcca);
      memset(&ohci_dev, 0, sizeof(struct ohci_device));
      if ((__u32) &ohci_dev.ed[0] & 0x7) {
            err("EDs not aligned!!");
            return -1;
      }
      memset(gtd, 0, sizeof(struct td) * (NUM_TD + 1));
      if ((__u32) gtd & 0x7) {
            err("TDs not aligned!!");
            return -1;
      }
      ptd = gtd;
      gohci.hcca = phcca;
      memset(phcca, 0, sizeof(struct ohci_hcca));

      gohci.disabled = 1;
      gohci.sleeping = 0;
      gohci.irq = -1;
      gohci.regs = (struct ohci_regs *)S3C24X0_USB_HOST_BASE;

      gohci.flags = 0;
      gohci.slot_name = "s3c2400";

      if (hc_reset(&gohci) < 0) {
            hc_release_ohci(&gohci);
            /* Initialization failed */
            clk_power->CLKCON &= ~(1 << 4);
            return -1;
      }

      /* FIXME this is a second HC reset; why?? */
      gohci.hc_control = OHCI_USB_RESET;
      writel(gohci.hc_control, &gohci.regs->control);
      wait_ms(10);

      if (hc_start(&gohci) < 0) {
            err("can't start usb-%s", gohci.slot_name);
            hc_release_ohci(&gohci);
            /* Initialization failed */
            clk_power->CLKCON &= ~(1 << 4);
            return -1;
      }
#ifdef      DEBUG
      ohci_dump(&gohci, 1);
#else
      wait_ms(1);
#endif
      ohci_inited = 1;
      urb_finished = 1;

      return 0;
}

int usb_lowlevel_stop(void)
{
      struct s3c24x0_clock_power *clk_power = s3c24x0_get_base_clock_power();

      /* this gets called really early - before the controller has */
      /* even been initialized! */
      if (!ohci_inited)
            return 0;
      /* TODO release any interrupts, etc. */
      /* call hc_release_ohci() here ? */
      hc_reset(&gohci);
      /* may not want to do this */
      clk_power->CLKCON &= ~(1 << 4);
      return 0;
}

#endif /* defined(CONFIG_USB_OHCI) && defined(CONFIG_S3C24X0) */

Generated by  Doxygen 1.6.0   Back to index